So, not ground breaking, but nice, simple approach for a coffee table. I’d been scoping out this slab of walnut for a couple months at Woodcraft and finally got the go-ahead from my client (from upper left to lower right) after working up a quick sketch… before sanding, I filled the larger cracks & voids with a 5 minute two-part epoxy mixed with dry coffee grounds. Then, sanded the slab down with 60grit, 100/150, and finally 220 for finish. After tack cloth clean up-two coats of low luster tung oil. The set of four, 16″ two hair-pin legs were ordered from Modern Urban Metals, which are fabricated in Grandville, MI. Delivered to a happy customer and friend.